site 2 site
Removing peer from correlator table failed, no match!
When you are setting a site to site VPN between two Cisco ASA IPSEC peers you may find it useful to turn on the debug command for phase 1 tunnel initiation. Phase 1 uses a key exchange protocol called ISAKMP. With this in mind I often turn on the Crypto ISAKMP debugging on the command line to provide me with useful feedback when setting up a vpn. This is done using the following command:
debug crypto isakmp 8Please note the trailing 8 is the level of debugging information you want sent to your console. This is configurable between 1-255.
